front page slideshow

1 apart apart 3 22 apart

es series

 
  • 4-way modular, rack mount 2500W Control and Amplification System for use 
    specifically with ES Series modules.
  • High Frequency, 100W, Class AB, push-pull, low intermodulation amplifier 
    with transformer balanced outputs.
  • Mid Frequency, 200W, Class AB, push-pull, low intermodulation amplifier 
    with transformer balanced outputs.
  • Mid Bass, 600W, high efficiency, current enhancing switching amplifier.
  • Subwoofer, 1600W, high efficiency, current enhancing switching amplifier.
  • Complete, on board speaker management system including equalization, time alignment, 
    crossover filters, amplifier overdrive protection, system set-up and output level controls.
  • Newly developed PDM - 20MHz sampling, digital delay alignment system setting new 
    standards for audio performance and dramatically increasing phase response precision.
  • AC soft start circuitry with ON/OFF AC breaker switch provides thorough power protection.
  • Setup provides selection and control of different subwoofer combinations.
  • External Subwoofer output with independent internal and external Level control +/- 6dB.
  • High Frequency control +/- 3dB for precise adjustment.
  • Comprehensive front-to-back cooling system features chassis sealed pcb’s for improved reliability.
  • Line Driver ready - rear mounted Input impedance selector provides selection of 
    optimal input impedance when used with a KV2 Audio LD4 Line Driver.
  • Individual signal inserts for Mid/High, Internal Subwoofer, and External Subwoofer signal paths 
    providing flexibility for insertion of signal processing or feeding from auxiliary sources as required.
  • Includes all speaker cables for a single stack ES system.

 

 


  • Professional Baltic birch construction with highly resistant polymer coating.
  • 131dB sustained output (per unit) 134dB peak - 136 dB/ 139dB (when using 2 units).
  • Horn reflex loaded, 18” low frequency driver with 4” (100mm) inside/outside, epoxy baked, high temperature voice coil assembly and carbon fibre reinforced cone assembly.
  • Four proprietary side handles for simplified handling and carrying.
  • Heavy duty front grille to work with the innovative new ES series magnetic carts.
  • High-impact, low friction feet are asymmetrically located on two sides allowing vertical or horizontal system set up, lock-in and easy cabinet movement.
  • Six industrial grade internal corner braces with twelve M10 suspension points.
  • M20 top hat for pole insertion.
  • Weather proofing option and special paint finishes available on request.

 

 


  • Professional, Baltic birch construction with highly resistant polymer coating.
  • 137dB sustained output 140dB peak (when using 2 units of ES 2.6).
  • High acoustic loading via twin asymmetrical chambers.
  • Two 15” low frequency drivers with 4” (100mm) inside/outside, epoxy baked, high temperature voice coil assembly and carbon fibre reinforced cone assembly.
  • Four proprietary side handles for simplified handling and carrying.
  • Heavy duty front grille to work with the innovative new ES series magnetic carts.
  • High-impact, low friction feet are asymmetrically located on two sides allowing vertical or horizontal system set up, lock-in and easy cabinet movement.
  • Six industrial grade internal corner braces with twelve M10 suspension points.
  • M20 top hat for pole mounting applications.
  • Weather proofing option and special paint finishes available on request.

 

 
  • Professional, Baltic birch construction with highly resistant polymer coating.
  • 134dB sustained output (per ES 2.5 unit) 137dB peak.
  • High acoustic loading via twin asymmetrical chambers.
  • Two 15” low frequency drivers with 4” (100mm) inside/outside, epoxy baked, high temperature voice coil assembly and carbon fibre reinforced cone assembly.
  • Four proprietary side handles for simplified handling and carrying.
  • Heavy duty front grille to work with the innovative new ES series magnetic carts. (KVV987114)
  • High-impact, low friction feet are asymmetrically located on two sides allowing vertical or horizontal system set up, lock-in and easy cabinet movement.
  • Six industrial grade internal corner braces with twelve M10 suspension points.
  • M20 top hat for pole mounting applications.
  • Weather proofing option and special paint finishes available on request.

 

 


  • Professional Baltic birch construction with highly resistant polymer coating.
  • 127dB sustained output (per unit) 130dB peak - 134 dB/ 137dB (when using 3 units).
  • Acoustic loading via twin asymmetrical chambers.
  • 15” bass driver with 3” (76mm) inside/outside, epoxy baked, high 
    temperature voice coil assembly and neodymium magnetic structure.
  • Proprietary side handle design for simplified handling and carrying.
  • High-impact low friction feet, asymmetrically located on three sides allowing vertical 
    or horizontal system set up, lock-in and easy cabinet movement.
  • Four internal corner braces tied to eight M10 suspension points. A total of 24 suspension 
    points are available for custom installation applications.
  • Weather proofing option and special paint finishes available on request.

 

 

  • Professional Baltic birch construction with wear resistant polymer coating.
  • 131dB sustained output, 134dB peak.
  • Controlled wide dispersion 90° x 40°, rotatable Mid /High horn 
    for mounting in vertical or horizontal orientation.
  • New patent pending 1.75” (44mm) Nitride Titanium diaphragm compression
    driver with complex geometry phase plug and neodymium magnetic structure for 
    higher output, incredibly low distortion and extended frequency response.
  • 6” midrange driver, with a 1.75” (44mm) voice coil and neodymium 
    magnet for increased control and output with reduced distortion and weight.
  • Horn loaded, 12” mid-bass driver with a 3” (76mm) inside/outside, epoxy
    baked, high temperature voice coil assembly and neodymium magnetic structure.
  • Three way active requirement - 900W from the EPAK 2500/R providing 600W for 
    the 12” low mid, 200W for the 6” midrange and 100W for the high frequency driver.
  • Proprietary side handle design for simplified handling and carrying.
  • High impact low friction feet, asymmetrically located on three sides allowing vertical 
    or horizontal system set up, lock- in and easy cabinet movement.
  • Four internal corner braces tied to eight M10 suspension points. A total of 
    24 suspension points are available for custom installation applications.
  • Top hat for pole mounting applications.
  • Weather proofing option and special paint finishes available on request.

 

Subscribe to RSS - es series