front page slideshow

1 apart apart 3 22 apart

esd series

 


The ultimate advantage of using the SAC2 anywhere within the signal chain is the immediate improvement in definition, resolution and dynamic range. A musical four-band equalizer allows for quickly shaping the sound, exactly as required without affecting the overall linear response. The two notch filters per output offer immediate control of dominant room resonances. The fixed crossover filter points of either 70Hz or 120Hz can be independently switched for Hi and Low outputs allowing either a standard 2 X 2 way configuration or an overlap to be created.

Alternatively the crossovers can be bypassed allowing simple2 in4 out program control. The transparent limiter feature can be used to maintain level without affecting the quality or dynamic performance of the system. Switchable polarity for each output, a mono sum and a low frequency super enhancement circuit also feature with all outputs incorporating KV2 Audio’s legendary VHD Line Drivers, allowing continuous signal integrity over extremely long distances without loss or degradation of sound quality. A security cover is also available for fixed installations.

 

 
The ESP 4000 is an ultra high definition 4 channel rack mountable power amplifier from KV2 Audio, specifically designed for optimised performance with ESD loudspeakers, as well as with other passive systems. For the ESP 4000 all electronic circuit boards are first mounted on individual aluminium heat sinks, then on a secondary, internally sealed chassis, this leaves only the heatsink fins exposed. Two separate power supplies ensure increased reliability and continuous delivery of full power. Two shock mounted fans move air across the fins but never directly across the electronic components. This minimises maintenance cycles and improves the components lifespan and and reliability. The ESP 4000 is housed in a professional 4U road rugged steel metal case with aluminium handles and evenly distributed weight.
 
The ESP2000 is an ultra high definition 2 channel rack mountable power amplifier from KV2 Audio, specifically designed for optimised performance with ESD loudspeakers, as well as with other passive systems. For the ESP2000 all electronic circuit boards are first mounted on individual aluminium heat sinks, then on a secondary, internally sealed chassis, this leaves only the heatsink fins exposed. Two separate power supplies ensure increased reliability and continuous delivery of full power. Two shock mounted fans move air across the fins but never directly across the electronic components. This minimises maintenance cycles and improves the components lifespan and and reliability. The ESP2000 is housed in a professional 2U road rugged steel metal case with aluminium handles and evenly distributed weight.

 


  • Professional, Baltic birch construction with wear resistant polymer coating
  • 127dB sustained output, 130dB peak
  • Excellent reproduction of bass frequencies with high transient content at high output levels
  • 15” high output, low frequency driver with 3” (75mm) inside/outside, epoxy baked, high temperature, voice coil assembly and neodymium magnetic structures
  • Two recessed side handles for simplified handling and carrying
  • Pole mount M20
  • Pole mount adaptor 35mm as accessory KVV987290
  • Thermal breaker protection with autoreset

 

 
  • Professional, Baltic birch construction with wear resistant polymer coating
  • 124dB sustained output, 137dB peak
  • Excellent reproduction of bass frequencies with high transient content at high output levels
  • 12” high output, low frequency driver with 3” (75mm) inside/outside, epoxy baked, high temperature, voice coil assembly and neodymium magnetic structures
  • Two recessed side handles for simplified handling and carrying
  • Pole mount M20
  • Pole mount adaptor 35mm as accessory KVV987290
  • Thermal breaker protection with autoreset

 

 
  • Professional, Baltic birch construction with wear resistant polymer coating.
  • 127dB sustained output, 130dB peak with very high dynamic range.
  • Compact, asymmetrical, trapezoidal cabinet design allows for use in stage monitor and under balcony applications.
  • Rotatable wide dispersion 80° H x 40° V horn.
  • Revolutionary passive delay line.
  • State of the art 3" (76mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, exceptionally low distortion and extended frequency response.
  • 12" woofer with Super Acoustic Active Impedance Control (AIC) voice coil technology and neodymium magnetic motor structure dramatically increases force, lowers distortion and provides increased frequency response linearity.
  • Proprietary top handle design for simplified handling and carrying, integrates one M10 suspension point, Omnimount bracket point and four M6 points.
  • Additional side and bottom M10 points for flexible rigging and installation options.
  • "Top-hat" for pole mounting applications.

 

 
  • Professional, Baltic birch construction with wear resistant polymer coating.
  • 125dB sustained output, 128dB peak with very high dynamic range.
  • Compact, asymmetrical, trapezoidal cabinet design allows for use in stage monitor or under balcony applications.
  • Rotatable wide dispersion 100° H x 90° V horn.
  • Revolutionary new passive delay line.
  • 1.75" (44mm) diaphragm compression driver with complex geometry phase plug for higher output, exceptionally low distortion, extended frequency response and neodymium magnetic motor structure.
  • 10" woofer with Super Acoustic Active Impedance Control (AIC) voice coil technology and neodymium magnetic motor structure dramatically increases forces, lowers distortion and provides increased frequency response linearity.
  • Proprietary top handle design for simplified handling and carrying, integrates one M10 suspension point, OmnimountTM bracket point and four M6 points.
  • Additional side and bottom M10 points for flexible bracket, rigging and installation options.
  • "Top-hat" pole mount fitted at the base of the cabinet.

 

 


  • Professional, Baltic birch construction with wear resistant polymer coating.
  • 122dB sustained output, 125dB peak with very high dynamic range.
  • Compact, asymmetrical cabinet design allows for use as front fill or in under balcony applications.
  • Wide dispersion 100° H x 100° V horn.
  • Revolutionary new passive delay line.
  • New patent pending 1.75" (44mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug for higher output, exceptionally low distortion, extended frequency response and neodymium magnetic motor structure.
  • 6" Low Inductance Lightweight woofer dedicated to high-quality vocal reproduction.
  • 2 x Low Inductance Lightweight low frequency woofers offer enhanced bass performance.
  • Proprietary top handle design for simplified handling and carrying, integrates one M10 suspension point, Omnimount bracket point and four M6 points.
  • Additional side and bottom M10 points for flexible bracket, rigging and installation options.
  • "Top-hat" pole mount fitted at the base of the cabinet.

 

 


  • Professional, Baltic birch construction with wear resistant polymer coating.
  • 117dB sustained output, 120dB peak with very high dynamic range.
  • Compact cabinet design allows for use as front fill or under balcony applications.
  • Wide dispersion 100° H x 100° V horn.
  • Revolutionary new passive delay line.
  • 1.75" (44mm) diaphragm compression driver with complex geometry phase plug for higher output, exceptionally low distortion, extended frequency response and neodymium magnetic motor structure.
  • 6" woofer with Low Inductance Lightweight voice coil technology and neodymium motor structure dramatically increases force and lowers distortion.
  • Proprietary top handle design for simplified handling and carrying, integrates one M10 suspension point, OmnimountTM bracket point and four M6 points.
  • Additional side and bottom M10 points for flexible bracket, rigging and installation options.
  • "Top-hat" pole mount fitted at the base of the cabinet.

 

Subscribe to RSS - esd series