front page slideshow

1 apart apart 3 22 apart

ex series

EX1.8 - High Output Active Subwoofer

  

  • Professional, Baltic birch construction with wear resistant polymer coating.
  • 131dB sustained output, 134dB peak.
  • 1000W high efficiency, current-enhancing, switching, low frequency amplifier.
  • Complete on board subwoofer management including equalization, crossover filters, amplifier overdrive protection, output level and phase controls.
  • Excellent reproduction of bass frequencies with high transient content at high output levels.
  • Stereo or Mono inputs with through signal outputs and 125Hz High Pass outputs.
  • 18” high output, low frequency drivers with 4” (100mm) inside/outside, epoxy baked, high temperature, voice coil assembly and neodymium magnetic structures.
  • Two recessed side handles for simplified handling and carrying.
  • Acetyl copolymer, high impact, low friction feet are located on two sides allowing lock-in and easy cabinet movement.
  • Five internal corner braces with four M10 suspension points.
  • M20 top hat for pole mounting applications.
  • LED indicators for signal present, limiter, thermal condition and power ON status.
EX2.5 MkII - Low Frequency Solution

 

  • Professional, Baltic birch construction with wear resistant polymer coating.
  • 134dB sustained output 137dB peak.
  • 1600W high efficiency, current enhancing, switching low frequency amplifier.
  • Speaker level EP4 output to drive one additional passive ES 2.6 subwoofer.
  • Complete on board subwoofer management including equalization, crossover
  • filters, amplifier overdrive protection, output level and phase controls.
  • Excellent reproduction of sub bass frequencies with high transient content at high output levels.
  • Stereo or Mono inputs with through signal outputs and 125Hz High Pass outputs.
  • Two 15” high output, low frequency drivers with 4” (100mm) inside/outside,
  • epoxy baked, high temperature, voice coil assembly and neodymium magnetic structures.
  • Six propietry side handles for simplified handling and carrying.
  • Heavy duty front grille to work with the innovative new EX 2.5 magnetic cart.
  • Acetyl copolymer high impact, low friction feet are located on two sides allowing vertical
  • or horizontal set up and easy cabinet movement. Feet lock in to the new ES subwoofers.
  • Six internal corner braces with twelve M10 suspension points. M20 top hat for pole mounting applications.
  • LED indicators for signal present, limiter, thermal condition and power ON status.

 

EX2.2 - Active Bass Module

 

  • Professional, Baltic birch construction with wear resistant polymer coating.
  • 130dB sustained output, 133dB peak.
  • 1000W high efficiency, current-enhancing, switching, low frequency amplifier.
  • Complete on board subwoofer management including equalization, crossover filters, amplifier overdrive protection, output level and phase controls.
  • Excellent reproduction of bass frequencies with high transient content at high output levels.
  • Stereo or Mono inputs with through signal outputs and 125Hz High Pass outputs.
  • Two 12” high output, low frequency drivers with 3” (75mm) inside/outside, epoxy baked, high temperature, voice coil assembly and neodymium magnetic structures.
  • Two recessed side handles for simplified handling and carrying.
  • Acetyl copolymer, high impact, low friction feet are located on two sides allowing lock-in and easy cabinet movement.
  • Two internal corner braces with four M10 suspension points.
  • M20 top hat for pole mounting applications.
  • LED indicators for signal present, limiter, thermal condition and power ON status.

 

EX1.2 - Ultra Compact Active Subwoofer

  

  • Professional, Baltic birch construction with wear resistant polymer coating.
  • 124dB sustained output, 127dB peak.
  • 500W high efficiency, current-enhancing, switching, low frequency amplifier.
  • Complete on board subwoofer management including equalization, crossover filters, amplifier overdrive protection, output level and phase controls.
  • Excellent reproduction of bass frequencies with high transient content at high output levels.
  • Stereo or Mono inputs with through signal outputs and 120Hz High Pass outputs.
  • 12” high output, low frequency drivers with 3” (75mm) inside/outside, epoxy baked, high temperature, voice coil assembly and neodymium magnetic structures.
  • Two recessed top handles for simplified handling and carrying.
  • M20 top hat for pole mounting applications.
  • LED indicators for signal present, limiter, thermal condition and power ON status.

 

EX12 - Extreme Resolution Active Speaker

  

  • Professional, Baltic birch construction with wear resistant polymer coating.
  • 127dB sustained output, 130dB peak with very high dynamic range and low noise floor.
  • 500W of total power with complete on-board speaker management system.
  • 450W high efficiency, current enhancing, switching low frequency amplifier
  • Very high quality 50W, low IM distortion, Class AB, high frequency amplifier with transformer balanced output.
  • Compact asymmetrical trapezoidal design allows for use in stage monitor or under balcony applications with high pass filter to adjust equalisation and phase response.
  • Wide dispersion 80° H x 40° V horn.
  • New state of the art 3” (76mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, exceptionally low distortion and extended frequency response.
  • 12” woofer with revolutionary Active Impedance Control (AIC) voice coil technology and neodymium magnetic motor structure dramatically increases force, lowers distortion and provides increased frequency response linearity.
  • Proprietary top and side handle designs for simplified handling and carrying, integrates one M10 hang point, OmniMount™ bracket point and four M6 bracket points.
  • Ten additional M10 suspension points for flexible rigging and installation options.
  • Top hat for pole mounting applications.
  • LED indicators for signal present, limiter, thermal condition and power ON status.

  

 

  • Professional, Baltic birch construction with wear resistant polymer coating.
  • 126dB sustained output, 129dB peak with very high dynamic range and low noise floor.
  • 500W of total power with complete on-board speaker management system.
  • 450W high efficiency, current enhancing, switching low frequency amplifier.
  • Very high quality 50W, low IM distortion, Class AB, high frequency amplifier with transformer balanced output.
  • Compact, asymmetrical, trapezoidal cabinet design allows for use in stage monitor or under balcony applications with high pass filter to adjust equalization and phase response.
  • Wide dispersion, 100° H x 80° V rotatable horn.
  • New patent-pending 1.75” (44mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug for higher output, exceptionally low distortion, extended frequency response and neodymium magnet structure.
  • 10” woofer with revolutionary Active Impedance Control (AIC) voice coil technology and neodymium magnetic motor structure dramatically increases force, lowers distortion and provides increased frequency response linearity.
  • Proprietary top handle design for simplified handling and carrying, integrates one M10 suspension point, OmniMount™ bracket point and four M6 bracket points.
  • Four additional M10 suspension points for flexible rigging and installation options.
  • Top hat for pole mounting applications.
  • LED indicators for signal present, limiter, thermal condition and power ON status.

  

 

  • Professional, Baltic birch construction with wear resistant polymer coating.
  • 124dB sustained output, 127dB peak with very high dynamic range and low noise floor.
  • 370W of total power with complete on-board speaker management system.
  • 350W high efficiency, current enhancing, switching low frequency amplifier.
  • Very high quality 20W, low IM distortion, Class AB, high frequency amplifier with transformer balanced output.
  • Compact, asymmetrical, low profile cabinet design allows for use as a front fill or in under balcony applications with high pass filter to adjust equalization and phase response.
  • Wide dispersion 100° H x 100° V horn.
  • New patent pending 1.75" (44mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug for higher output, exceptionally low distortion, extended frequency response and neodymium magnet structure.
  • Two 6" woofers feature neodymium magnetic motor structures that dramatically increase force, lower distortion and provide increased frequency response linearity.
  • Proprietary top handle design for simplified handling and carrying, integrates one M10 suspension point, Omnimount™ bracket point and four M6 points.
  • Additional side and bottom M10 points for flexible bracket, rigging and installation options.
  • "Top-hat" pole mount fitted at the base of the cabinet.
  • LED indicators for signal present and Power ON status.

  

EX6 - The Ultimate Compact Active System

 

  • Professional, Baltic birch construction with wear resistant polymer coating.
  • 117dB sustained output, 120dB peak with very high dynamic range and low noise floor.
  • 200W of total power with complete on-board speaker management system.
  • 180W high efficiency, current enhancing, switching low frequency amplifier.
  • Very high quality 20W, low IM distortion, Class AB, high frequency amplifier with transformer balanced output.
  • Compact, asymmetrical, trapezoidal cabinet design allows for use in stage monitor or under balcony applications with high pass filter to adjust equalization and phase response.
  • Wide dispersion 100° H x 100° V horn.
  • New patent pending 1.75” (44mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug for higher output, exceptionally low distortion, extended frequency response and neodymium magnet structure.
  • 6” woofer with revolutionary Active Impedance Control (AIC) voice coil technology and neodymium magnetic motor structure dramatically increases force, lowers distortion and provides increased frequency response linearity.
  • Proprietary top handle design for simplified handling and carrying, integrates one M10 suspension point, Omnimount™ bracket point and four M6 points.
  • Additional side and bottom M10 points for flexible bracket, rigging, and installation options.
  • Easy fix pole mounting accessory fastens into the back of the unit.
  • LED indicators for signal present, limiter, thermal condition and power ON status.

  

Subscribe to RSS - ex series