front page slideshow

1 apart apart 3 22 apart

vhd series

 


  • Two channel 3200W, Control and Amplification System for use specifically with VHD series subwoofers.
  • Bridge mode possibillity.
  • Two individual 1600W, high efficiency, current enhancing switching amplifiers with separate Input and output.
  • Two individual transformers and power supply circuits for increased reliability and improved power delivery.
  • On board amplifier overdrive protection.
  • AC soft start circuitry with two individual ON/OFF AC breaker switches providing thorough power protection.
  • Comprehensive front-to-back cooling system features chassis sealed pcb’s for improved reliability.

 

 


  • Three way modular, 2900W Control and Amplification System for use specifically with VHD series modules.
  • High Frequency, 300W, Class AB, push-pull low intermodulation amplifier with transformer balanced outputs.
  • Mid Frequency, 1000W, high efficiency, current enhancing switching amplifier.
  • Mid Bass, 1600W, high efficiency, current enhancing switching amplifier.
  • Setup provides two channel selection and control of different VHD subwoofer combinations, or full range mode, with level control +/- 6dB and two rear mounted line level subwoofer outputs to feed a VHD 3200 subwoofer amplifier.
  • Complete, on board speaker management system including equalization, time alignment, crossover filters, amplifier overdrive protection, system set-up and output level controls.
  • Newly developed PDM 20MHz sampling, digital delay alignment system setting new standards for audio performance and dramatically increasing phase response precision and definition.
  • AC soft start circuitry with ON/OFF AC breaker switch provides thorough power protection.
  • Comprehensive front-to-back cooling system features chassis sealed pcb’s for improved reliability.
  • Two per side switch engages a specific set of filters and operating parameters for larger
  • scale events when using an extra VHD 2000 and VHD 2.0 per side.
  • Individual signal inserts for Mid/High, Subwoofer A, and Subwoofer B providing flexibility for insertion of signal processing or feeding from auxiliary sources as required.
  • Front panel Input Impedance selector provides selection of optimal input impedance when used with a KV2 Audio LD4 Line Driver.

 

 


Designed in response to calls for a high output ultra low frequency subwoofer solution, the VHD2.21 is a double 21” subwoofer with an input power handling capability of 3200W. Incredibly efficient, the 2.21 has a sensitivity of 106dB at one watt/one meter and can produce output levels in excess of 140dB. It has a frequency response from 28Hz through to 240Hz. Whilst larger than KV2 Audio’s existing subwoofers it still fits in with the company’s philosophy of providing maximum performance from within a compact footprint. Originally designed as part of a VHD system it is voiced for live music but also excels in the field of club and dance music. In any situation it works very effectively, operating down to 28Hz, alongside other VHD products, the smaller ES range, or as an incredible stand-alone subwoofer that can complement any other manufacturers systems. When the ultimate in extended bass response is needed the 2.21 delivers amazing results. Whether it’s filling a stadium, a theatre or a club the VHD2.21 delivers.

 


  • Professional, Baltic birch construction with highly resistant polymer coating.
  • Very High Definition ultra low frequency reproduction.
  • 135dB sustained output / 137dB peak (using 2 units of VHD 1.21).
  • Large-chamber bass reflex low Q bandpass design.
  • Single 21” low frequency driver with 4” (100mm) inside/outside, epoxy baked,
    high temperature voice coil assembly and carbon fibre reinforced cone assembly.
  • Proprietary side handles (six) for simplified handling and carrying.
  • High impact low friction feet, allowing lock- in to other VHD cabinets and easy cabinet movement.
  • Front locking aluminium VHD wheel boards with wraparound hardwood bumpers.
  • Weather proofing option and special paint finishes available on request.

 

 


  • Professional, Baltic birch construction with highly resistant polymer coating.
  • Four full length pieces of fly-track (two per side) and one five point pull back piece on the rear of the cabinet.
  • Very High Definition low frequency reproduction.
  • 146dB sustained output / 149dB peak (using 4 units of VHD4.18).
  • Large chamber horn reflex acoustic design.
  • Single 18” low frequency driver with 4” (100mm) inside/outside, epoxy baked, high temperature voice coil assembly and neodymium magnetic structure.
  • Proprietary side handles (six) for simplified handling and carrying.
  • High impact low friction feet, allowing lock-in to other VHD cabinets and easy cabinet movement.
  • Front locking aluminium VHD wheel boards with wraparound hardwood bumpers.
  • Weather proofing option and special paint finishes available on request.

 

 


  • Professional, Baltic birch construction with highly resistant polymer coating.
  • Four full length pieces of fly-track (two per side) and one five point pull back piece on the rear of the cabinet.
  • Very High Definition low frequency reproduction.
  • 140dB sustained output / 143dB peak (using 2 units of VHD 2.15)High acoustic loading via twin asymmetrical chambers.
  • Two 15” low frequency drivers with 4” (100mm) inside/outside, epoxy baked, high temperature voice coil assembly and neodymium magnetic structures.
  • Proprietary side handles (six) for simplified handling and carrying.
  • High impact low friction feet, allowing lock- in to other VHD cabinets and easy cabinet movement.
  • Front locking aluminium VHD wheel boards with wraparound hardwood bumpers.
  • Weather proofing option and special paint finishes available on request.

 

 


  • Professional Baltic birch construction with wear-resistant polymer coating.
  • Cut away down angle for correct positioning when flown underneath VHD 2.0 cabinet.
  • Four pieces of fly-track (two per side).
  • Very High Definition audio reproduction.
  • 134dB sustained output, 137dB peak.
  • Controlled wide dispersion 110° x 40° Mid/High horn with a flat response to 180°.
  • Revolutionary 3” (76mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, exceptionally low distortion and extended frequency response.
  • 8” Trans-Coil midrange driver, with a 3” (76mm) voice coil and neodymium magnet for increased control and output with reduced distortion and weight. Horn loaded 12” mid-bass driver with 3”(76mm) inside/outside, epoxy baked, high temperature voice coil assembly and neodymium magnetic structure.
  • Three way active requirement - 1000W from the VHD 2000 providing 600W for the 12” Low Mid, 300W for the 8” Midrange and 100W for the High Frequency.
  • Proprietary side handle design (four) for simplified handling and carrying.
  • High impact low friction feet, allowing lock- in to other VHD cabinets and easy cabinet movement.
  • Front locking aluminium VHD wheel boards with wraparound hardwood bumpers.
  • Weather proofing option and special paint finishes available on request.

 

 


  • Professional Baltic birch construction with wear-resistant polymer coating.
  • Four full length pieces of fly-track (two per side) and two five point, pull back pieces on the rear of the cabinet.
  • Very High Definition audio reproduction.
  • 139 dB sustained output, 142dB peak.
  • Controlled wide dispersion 80° x 40° Mid / High horn.
  • New state of the art 3” (76mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, exceptionally low distortion and extended frequency response.
  • Two 8” Trans-Coil midrange drivers, with a 3” (76mm) voice coil and neodymium magnet for increased control and output with reduced distortion and weight.
  • Two horn loaded 12” mid-bass drivers with 3” (76mm) inside/outside, epoxy baked, high temperature voice coil assemblies and neodymium magnetic structures.
  • Three way active requirement - 2000W from the VHD 2000 providing 1200W for the 12” Low Mids, 600W for the 8” Midranges and 200W for the High Frequency.
  • Proprietary side and top handle design (six) for simplified handling and carrying.
  • High impact low friction feet, allowing lock- in to the VHD subwoofers and easy cabinet movement.
  • Front locking aluminium VHD wheel boards with wraparound hardwood bumpers.
  • Weather proofing option and special paint finishes available on request.

 

Subscribe to RSS - vhd series